Explore our selected range of high-performance piping elements, compression connections, and control valves manufactured to European and American standards for distribution infrastructure.
Cross-linked polyethylene with an Ethylene Vinyl Alcohol (EVOH) oxygen barrier, commonly designated as PEX-b EVOH, represents a critical engineering breakthrough for closed-loop hydronic heating and cooling systems. The PEX-b method leverages a silane-based cross-linking mechanism. During extrusion, silane molecules are grafted to the polyethylene backbone, creating structural links via hot-water or steam curing processes. This results in a cross-linking degree exceeding 65%, conforming directly to the requirements of international standards like EN ISO 15875 and ASTM F876.
Without an oxygen barrier, standard cross-linked polyethylene allows molecular oxygen to diffuse through the pipe walls at elevated operating temperatures. This ingress of oxygen causes rapid oxidation and premature corrosion of iron-based components in radiant systems, including central boilers, circulating pumps, manifolds, and radiator cores. EVOH acts as a physical shield, limiting oxygen transmission to negligible limits.
PEX-B EVOH pipes are typically structured in two configurations:
Our EVOH barrier ensures an oxygen transmission rate (OTR) of less than 0.32 mg/(m²·day) at a test temperature of 40°C, complying with standard DIN 4726. This preserves the closed-loop system chemistry and protects modern heat exchangers.
Classified for continuous operation at temperature parameters up to 95°C. The silane cross-linking structural grid maintains mechanical integrity against high burst pressures even during transient temperature spikes.
The smooth inner liner reduces fluid drag, delivering a low roughness coefficient (e = 0.007 mm). This minimizes pressure drops and flow noise, while preventing scale accumulation and biological slime growth.
| Performance Specification | Reference Test Standard | Target Engineering Value | Notes / Conditions |
|---|---|---|---|
| Cross-linking Degree (Gel Content) | ASTM D2765 / ISO 10147 | ≥ 65% | Ensures dimensional stability |
| Oxygen Permeability Rate | DIN 4726 / ISO 17455 | ≤ 0.32 mg/(m²·d) @ 40°C | Crucial for metallic component protection |
| Density | ISO 1183 | ≥ 0.940 g/cm³ | High density polymer matrix |
| Thermal Conductivity | DIN 52612 | 0.41 W/(m·K) | Optimal heat transfer for radiant floors |
| Coefficient of Linear Expansion | ASTM D696 | 1.4 × 10⁻⁴ / K | Requires structural expansion allowance |
| Working Pressure Rating | ISO 15875 (Class 4 / Class 5) | 0.6 MPa / 0.8 MPa / 1.0 MPa | Depends on SDR rating (e.g., SDR 9) |
We are Ningbo Minde Building Materials Co., LTD., based in Zhejiang Province, China. For over 20 years, we have specialized in high-performance plastic piping solutions, distribution networks, and advanced connection fittings. Our products are widely used in residential water supply systems, agricultural irrigation, and underfloor heating.
To deliver eco-friendly and durable piping systems, Minde strictly uses imported high-quality virgin raw materials. Our manufacturing facility spans over 90,000 square meters and is backed by a skilled team of over 200 employees, including expert technical engineers and QC specialists.
Minde implements a comprehensive three-stage inspection system to achieve zero-defect performance:
Engineering pipeline systems for diverse global regions requires rigorous alignment with local regulatory criteria. Minde maintains a wide portfolio of certifications to simplify international clearance and support mechanical compliance:
Fully certified under CE and conform to EN ISO 15875 requirements for hot and cold water installations. Additionally meets the German DIN 4726 standard for oxygen barrier underfloor heating pipes.
Approved by the British WRAS (Water Regulations Advisory Scheme) for drinking water suitability, confirming that materials do not support bacterial multiplication or leach toxins.
Meets GOST-R standards for commercial plumbing, allowing distribution throughout Russia and the CIS. Designed to perform reliably in demanding cold climates.
With our certifications and ISO 9001:2022 / ISO 14001 compliance, Minde products are exported to more than 50 countries across Europe, the Middle East, Southeast Asia, and South America. Our export services include handling regional regulatory paperwork, providing shipping support, and preparing customs clearance documentation.
PEX-b EVOH pipes are versatile components used in modern thermal transfer and utility supply systems. They perform reliably in several key application areas:
Installed directly in concrete screeds or light thermal plates to distribute heat evenly. The EVOH barrier prevents oxygen ingress, protecting iron manifold components and boiler surfaces from corrosion.
Highly resistant to chlorine and scaling, ensuring clean drinking water delivery. The smooth inner surface prevents bacteria accumulation and maintains stable water pressure over long pipe runs.
Highly flexible and resistant to ground shifting or low-temperature impact. Performs reliably in agricultural projects, municipal water distribution, and greenhouse heating networks.
As a direct manufacturer, Minde provides extensive OEM and ODM solutions to meet the branding, sizing, and packaging requirements of our global business partners:
We produce standard outer diameters from 16mm to 32mm, with wall thicknesses designed for SDR 9 and standard SDR dimensions. Custom dimensional requests can be accommodated by our tooling department.
Pipes can be laser-printed with custom branding, logo layouts, metric markers, production codes, and standard listings (e.g., ASTM, EN ISO) at specified intervals.
Coils can be customized in lengths of 100m, 200m, 300m, or 500m. We offer custom shrink-wrapping, protective cardboard boxes, and reinforced wooden pallets for safe long-distance shipping.
MINDE welcomes business partners from all over the world. Our core business principles are INNOVATION, QUALITY, COMPETITIVE PRICE, and EXCELLENT SERVICE. We focus on expanding our presence in international markets by building brand trust and providing reliable customer support. We are committed to supplying high-quality products, professional service, and competitive factory-direct pricing.
Common technical and commercial questions regarding PEX-b EVOH pipes, sizing parameters, and OEM sourcing:
Explore additional components for sanitary installations, agricultural irrigation, and floor heating distribution networks, all built to the same strict standards.
Minde